net.Socket

Calls readable.destroy() with an AbortError and returns a promise that fulfills when the stream is finished.

Returns the bound address, the address family name and port of the socket as reported by the operating system:{ port: 12346, family: 'IPv4', address: '127.0.0.1' }

This method returns a new stream with chunks of the underlying stream paired with a counter in the form [index, chunk]. The first index value is 0 and it increases by 1 for each chunk produced.

The writable.cork() method forces all written data to be buffered in memory. The buffered data will be flushed when either the uncork or end methods are called.

The primary intent of writable.cork() is to accommodate a situation in which several small chunks are written to the stream in rapid succession. Instead of immediately forwarding them to the underlying destination, writable.cork() buffers all the chunks until writable.uncork() is called, which will pass them all to writable._writev(), if present. This prevents a head-of-line blocking situation where data is being buffered while waiting for the first small chunk to be processed. However, use of writable.cork() without implementing writable._writev() may have an adverse effect on throughput.

See also: writable.uncork(), writable._writev().

Destroy the stream. Optionally emit an 'error' event, and emit a 'close' event (unless emitClose is set to false). After this call, the readable stream will release any internal resources and subsequent calls to push() will be ignored.

Once destroy() has been called any further calls will be a no-op and no further errors except from _destroy() may be emitted as 'error'.

Implementors should not override this method, but instead implement readable._destroy().

Destroys the socket after all data is written. If the finish event was already emitted the socket is destroyed immediately. If the socket is still writable it implicitly calls socket.end().

This method returns a new stream with the first limit chunks dropped from the start.

Returns an array listing the events for which the emitter has registered listeners. The values in the array are strings or Symbols.

import { EventEmitter } from 'node:events';

const myEE = new EventEmitter();
myEE.on('foo', () => {});
myEE.on('bar', () => {});

const sym = Symbol('symbol');
myEE.on(sym, () => {});

console.log(myEE.eventNames());
// Prints: [ 'foo', 'bar', Symbol(symbol) ]

This method is similar to Array.prototype.every and calls fn on each chunk in the stream to check if all awaited return values are truthy value for fn. Once an fn call on a chunk awaited return value is falsy, the stream is destroyed and the promise is fulfilled with false. If all of the fn calls on the chunks return a truthy value, the promise is fulfilled with true.

This method allows filtering the stream. For each chunk in the stream the fn function will be called and if it returns a truthy value, the chunk will be passed to the result stream. If the fn function returns a promise - that promise will be awaited.

This method returns a new stream by applying the given callback to each chunk of the stream and then flattening the result.

It is possible to return a stream or another iterable or async iterable from fn and the result streams will be merged (flattened) into the returned stream.

This method allows iterating a stream. For each chunk in the stream the fn function will be called. If the fn function returns a promise - that promise will be awaited.

This method is different from for await...of loops in that it can optionally process chunks concurrently. In addition, a forEach iteration can only be stopped by having passed a signal option and aborting the related AbortController while for await...of can be stopped with break or return. In either case the stream will be destroyed.

This method is different from listening to the 'data' event in that it uses the readable event in the underlying machinary and can limit the number of concurrent fn calls.

Returns the current max listener value for the EventEmitter which is either set by emitter.setMaxListeners(n) or defaults to EventEmitter.defaultMaxListeners.

The readable.isPaused() method returns the current operating state of the Readable. This is used primarily by the mechanism that underlies the readable.pipe() method. In most typical cases, there will be no reason to use this method directly.

const readable = new stream.Readable();

readable.isPaused(); // === false
readable.pause();
readable.isPaused(); // === true
readable.resume();
readable.isPaused(); // === false

The iterator created by this method gives users the option to cancel the destruction of the stream if the for await...of loop is exited by return, break, or throw, or if the iterator should destroy the stream if the stream emitted an error during iteration.

Returns the number of listeners listening for the event named eventName. If listener is provided, it will return how many times the listener is found in the list of the listeners of the event.

Returns a copy of the array of listeners for the event named eventName.

server.on('connection', (stream) => {
  console.log('someone connected!');
});
console.log(util.inspect(server.listeners('connection')));
// Prints: [ [Function] ]

This method allows mapping over the stream. The fn function will be called for every chunk in the stream. If the fn function returns a promise - that promise will be awaited before being passed to the result stream.

Alias for emitter.removeListener().

Pauses the reading of data. That is, 'data' events will not be emitted. Useful to throttle back an upload.

Returns a copy of the array of listeners for the event named eventName, including any wrappers (such as those created by .once()).

import { EventEmitter } from 'node:events';
const emitter = new EventEmitter();
emitter.once('log', () => console.log('log once'));

// Returns a new Array with a function `onceWrapper` which has a property
// `listener` which contains the original listener bound above
const listeners = emitter.rawListeners('log');
const logFnWrapper = listeners[0];

// Logs "log once" to the console and does not unbind the `once` event
logFnWrapper.listener();

// Logs "log once" to the console and removes the listener
logFnWrapper();

emitter.on('log', () => console.log('log persistently'));
// Will return a new Array with a single function bound by `.on()` above
const newListeners = emitter.rawListeners('log');

// Logs "log persistently" twice
newListeners[0]();
emitter.emit('log');

The readable.read() method reads data out of the internal buffer and returns it. If no data is available to be read, null is returned. By default, the data is returned as a Buffer object unless an encoding has been specified using the readable.setEncoding() method or the stream is operating in object mode.

The optional size argument specifies a specific number of bytes to read. If size bytes are not available to be read, null will be returned unless the stream has ended, in which case all of the data remaining in the internal buffer will be returned.

If the size argument is not specified, all of the data contained in the internal buffer will be returned.

The size argument must be less than or equal to 1 GiB.

The readable.read() method should only be called on Readable streams operating in paused mode. In flowing mode, readable.read() is called automatically until the internal buffer is fully drained.

const readable = getReadableStreamSomehow();

// 'readable' may be triggered multiple times as data is buffered in
readable.on('readable', () => {
  let chunk;
  console.log('Stream is readable (new data received in buffer)');
  // Use a loop to make sure we read all currently available data
  while (null !== (chunk = readable.read())) {
    console.log(`Read ${chunk.length} bytes of data...`);
  }
});

// 'end' will be triggered once when there is no more data available
readable.on('end', () => {
  console.log('Reached end of stream.');
});

Each call to readable.read() returns a chunk of data, or null. The chunks are not concatenated. A while loop is necessary to consume all data currently in the buffer. When reading a large file .read() may return null, having consumed all buffered content so far, but there is still more data to come not yet buffered. In this case a new 'readable' event will be emitted when there is more data in the buffer. Finally the 'end' event will be emitted when there is no more data to come.

Therefore to read a file's whole contents from a readable, it is necessary to collect chunks across multiple 'readable' events:

const chunks = [];

readable.on('readable', () => {
  let chunk;
  while (null !== (chunk = readable.read())) {
    chunks.push(chunk);
  }
});

readable.on('end', () => {
  const content = chunks.join('');
});

A Readable stream in object mode will always return a single item from a call to readable.read(size), regardless of the value of the size argument.

If the readable.read() method returns a chunk of data, a 'data' event will also be emitted.

Calling read after the 'end' event has been emitted will return null. No runtime error will be raised.

Opposite of unref(), calling ref() on a previously unrefed socket will not let the program exit if it's the only socket left (the default behavior). If the socket is refed calling ref again will have no effect.

Removes all listeners, or those of the specified eventName.

It is bad practice to remove listeners added elsewhere in the code, particularly when the EventEmitter instance was created by some other component or module (e.g. sockets or file streams).

Returns a reference to the EventEmitter, so that calls can be chained.

Close the TCP connection by sending an RST packet and destroy the stream. If this TCP socket is in connecting status, it will send an RST packet and destroy this TCP socket once it is connected. Otherwise, it will call socket.destroy with an ERR_SOCKET_CLOSED Error. If this is not a TCP socket (for example, a pipe), calling this method will immediately throw an ERR_INVALID_HANDLE_TYPE Error.

Resumes reading after a call to socket.pause().

The writable.setDefaultEncoding() method sets the default encoding for a Writable stream.

Set the encoding for the socket as a Readable Stream. See readable.setEncoding() for more information.

Enable/disable keep-alive functionality, and optionally set the initial delay before the first keepalive probe is sent on an idle socket.

Set initialDelay (in milliseconds) to set the delay between the last data packet received and the first keepalive probe. Setting 0 forinitialDelay will leave the value unchanged from the default (or previous) setting.

Enabling the keep-alive functionality will set the following socket options:

• SO_KEEPALIVE=1
• TCP_KEEPIDLE=initialDelay
• TCP_KEEPCNT=10
• TCP_KEEPINTVL=1

By default EventEmitters will print a warning if more than 10 listeners are added for a particular event. This is a useful default that helps finding memory leaks. The emitter.setMaxListeners() method allows the limit to be modified for this specific EventEmitter instance. The value can be set to Infinity (or 0) to indicate an unlimited number of listeners.

Returns a reference to the EventEmitter, so that calls can be chained.

Enable/disable the use of Nagle's algorithm.

When a TCP connection is created, it will have Nagle's algorithm enabled.

Nagle's algorithm delays data before it is sent via the network. It attempts to optimize throughput at the expense of latency.

Passing true for noDelay or not passing an argument will disable Nagle's algorithm for the socket. Passing false for noDelay will enable Nagle's algorithm.

Sets the socket to timeout after timeout milliseconds of inactivity on the socket. By default net.Socket do not have a timeout.

When an idle timeout is triggered the socket will receive a 'timeout' event but the connection will not be severed. The user must manually call socket.end() or socket.destroy() to end the connection.

socket.setTimeout(3000);
socket.on('timeout', () => {
  console.log('socket timeout');
  socket.end();
});

If timeout is 0, then the existing idle timeout is disabled.

The optional callback parameter will be added as a one-time listener for the 'timeout' event.

This method is similar to Array.prototype.some and calls fn on each chunk in the stream until the awaited return value is true (or any truthy value). Once an fn call on a chunk awaited return value is truthy, the stream is destroyed and the promise is fulfilled with true. If none of the fn calls on the chunks return a truthy value, the promise is fulfilled with false.

This method returns a new stream with the first limit chunks.

This method allows easily obtaining the contents of a stream.

As this method reads the entire stream into memory, it negates the benefits of streams. It's intended for interoperability and convenience, not as the primary way to consume streams.

The writable.uncork() method flushes all data buffered since cork was called.

When using writable.cork() and writable.uncork() to manage the buffering of writes to a stream, defer calls to writable.uncork() using process.nextTick(). Doing so allows batching of all writable.write() calls that occur within a given Node.js event loop phase.

stream.cork();
stream.write('some ');
stream.write('data ');
process.nextTick(() => stream.uncork());

If the writable.cork() method is called multiple times on a stream, the same number of calls to writable.uncork() must be called to flush the buffered data.

stream.cork();
stream.write('some ');
stream.cork();
stream.write('data ');
process.nextTick(() => {
  stream.uncork();
  // The data will not be flushed until uncork() is called a second time.
  stream.uncork();
});

See also: writable.cork().

The readable.unpipe() method detaches a Writable stream previously attached using the pipe method.

If the destination is not specified, then all pipes are detached.

If the destination is specified, but no pipe is set up for it, then the method does nothing.

import fs from 'node:fs';
const readable = getReadableStreamSomehow();
const writable = fs.createWriteStream('file.txt');
// All the data from readable goes into 'file.txt',
// but only for the first second.
readable.pipe(writable);
setTimeout(() => {
  console.log('Stop writing to file.txt.');
  readable.unpipe(writable);
  console.log('Manually close the file stream.');
  writable.end();
}, 1000);

Calling unref() on a socket will allow the program to exit if this is the only active socket in the event system. If the socket is already unrefed callingunref() again will have no effect.

Passing chunk as null signals the end of the stream (EOF) and behaves the same as readable.push(null), after which no more data can be written. The EOF signal is put at the end of the buffer and any buffered data will still be flushed.

The readable.unshift() method pushes a chunk of data back into the internal buffer. This is useful in certain situations where a stream is being consumed by code that needs to "un-consume" some amount of data that it has optimistically pulled out of the source, so that the data can be passed on to some other party.

The stream.unshift(chunk) method cannot be called after the 'end' event has been emitted or a runtime error will be thrown.

Developers using stream.unshift() often should consider switching to use of a Transform stream instead. See the API for stream implementers section for more information.

// Pull off a header delimited by \n\n.
// Use unshift() if we get too much.
// Call the callback with (error, header, stream).
import { StringDecoder } from 'node:string_decoder';
function parseHeader(stream, callback) {
  stream.on('error', callback);
  stream.on('readable', onReadable);
  const decoder = new StringDecoder('utf8');
  let header = '';
  function onReadable() {
    let chunk;
    while (null !== (chunk = stream.read())) {
      const str = decoder.write(chunk);
      if (str.includes('\n\n')) {
        // Found the header boundary.
        const split = str.split(/\n\n/);
        header += split.shift();
        const remaining = split.join('\n\n');
        const buf = Buffer.from(remaining, 'utf8');
        stream.removeListener('error', callback);
        // Remove the 'readable' listener before unshifting.
        stream.removeListener('readable', onReadable);
        if (buf.length)
          stream.unshift(buf);
        // Now the body of the message can be read from the stream.
        callback(null, header, stream);
        return;
      }
      // Still reading the header.
      header += str;
    }
  }
}